Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Oldcastle Driveway & Pavers: The Los Angeles Owner’s Guide
We supply and install Oldcastle-compatible driveway pavers and paver components throughout Los Angeles, with installed paver driveway jobs typically running $8,260 – $21,240 depending on square footage, paver line, and the condition of your existing base. Most paver failures show up the same way: a section sinks or shifts after rain, an edge row crumbles, or a paver cracks under a parked car. You’ll usually spot the damage as a low spot that holds water in winter, or a loose paver that rocks when you step on it. We keep common Oldcastle paver profiles in stock and can match most legacy lines within a few days. Penhallow Remodeling Los Angeles is an independent installation and repair provider; we are not affiliated with Oldcastle, but we work with their paver systems every week across LA basements, walkways, and driveways.
Key Takeaways
- Oldcastle paver driveway installs in Los Angeles run $8,260 – $21,240 on average.
- Most failures trace back to the base layer, not the paver itself.
- We match existing Oldcastle pavers by size, thickness, and color batch, not just style name.
- Every job gets a written price before work starts and a written 365-Day Done Right Promise.
Which Oldcastle Models This Applies To
Oldcastle’s paver lines have shifted names over the years: older driveways in Los Angeles often carry Belgard or Pavestone branded pavers made by the same manufacturing family, while newer installs may use the Oldcastle APE or Holland stone profiles. The catch is that Oldcastle pavers are not one universal size. A Holland stone paver is typically 60mm thick for driveways, while a walkway paver may be as thin as 40mm. If you replace a driveway paver with a walkway-spec paver, it will crack under vehicle weight within a year. We always measure thickness with calipers before ordering a match. Color matters too: Oldcastle runs color batches, and a paver poured in 2015 will not perfectly match a 2023 batch. When we can’t get an exact batch match, we blend the new pavers across the field so the repair reads as intentional, not patched.
Aftermarket equivalents exist for many Oldcastle profiles, and in some cases they’re a smarter buy than chasing an OEM paver that’s been discontinued. We’ll tell you when an equivalent is the better call and when it’s worth paying for the exact Oldcastle match. The decision comes down to structural load, color exposure, and whether the driveway is visible from the street or tucked behind a gate.
Styles & brands we work with
Signs Your Oldcastle Driveway & Pavers Are Failing
- Paver sinkage or depressions after rain. This almost always means the compacted base below has washed out or was never compacted correctly. In Los Angeles clay-heavy soils, winter rain moves through paver joints, erodes the sand bedding, and leaves a void that lets pavers drop. Add a car and the depression spreads fast.
- Loose pavers that rock or lift at the edges. Edge restraints fail over time. Without a solid edging to hold the field tight, the outer rows drift outward and loosen. Once edges go, the whole driveway begins to spread.
- Cracked pavers in the wheel paths. Vehicle weight is concentrated in two narrow strips. If the base is thin or the pavers are 40mm rather than 60mm, you’ll see crack lines follow your tire tracks within a few seasons.
- Weeds or ants pushing up between pavers. Weeds aren’t just cosmetic. Their roots break the sand joint bond and let water in. Ants excavate the sand, which does the same thing faster. The fix is pulling and resetting the affected area, then re-sanding with polymeric sand.
- Washed-out sand joints and visible gaps. If your paver joints look empty after big Los Angeles storms, water is getting under the pavers and taking the sub-base with it. Address this early and you avoid paying for a full re-set later.
Replacement Cost & What’s Included
In Los Angeles, a partial paver repair that addresses a sunken or cracked section typically runs a few hundred dollars if the base is mostly intact, while a full paver driveway installation averages $8,260 – $21,240. What drives the range: total square footage, paver thickness and profile, whether we’re salvaging and reusing existing pavers or ordering new Oldcastle stock, base excavation depth, and access for equipment. If the base is shot, that’s the majority of the labor. There’s no shortcut around re-compacting it, and we won’t quote you one.
Every quote is written, line-itemed, and fixed before we cut the first paver. You’ll see parts, labor, base material, haul-off, and the written guarantee as separate lines. If the repair fails inside the guarantee window, we come back and re-set it at no charge. That’s the 365-Day Done Right Promise, and it’s in writing on every job. For an exact number on your Oldcastle driveway, call (213) 277-6578. Estimates are free.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
If a single paver near the sidewalk has cracked, you can often lift it with a flat bar, check whether the base sand is washed out, and reset it on fresh bedding sand. That’s a reasonable Saturday project. What we would not recommend doing yourself is pulling up a section of sunken driveway, re-compacting the base, and resetting pavers to handle vehicle load. The compactor alone matters: a hand tamper gets you maybe 80% of the density a plate compactor does, and that difference shows up as a new depression within a year. Once you’re into base work, you also need to know what to do with the excavated soil, how to grade for drainage in Los Angeles’ winter rain patterns, and how to set edge restraints that hold.
Trevor Nash grew up in the Crenshaw district and has seen plenty of driveways that were “fixed” by someone who skipped the base. The repair fails the same way the first one did, and now you’ve paid twice. Give you a number first, then pick up the tools. Call (213) 277-6578 and we’ll come out, measure what’s there, and tell you plainly whether this is a paver swap or a base rebuild.
FAQs
A properly installed Oldcastle paver driveway in Los Angeles should last 25 – 40 years before the pavers themselves need replacement. What fails much sooner, usually inside 5 – 15 years, is the base below. The pavers are concrete; the base is compacted soil and aggregate. If you’re seeing failure in year seven, the pavers almost certainly aren’t the problem. Call (213) 277-6578 and we’ll tell you what’s actually failing before you spend money on replacement pavers.
Yes, in most cases we repair only the affected section. The caveat is matching: Oldcastle pavers change color slightly between manufacturing runs, so a brand-new paver in a 12-year-old driveway will be noticeable. We blend the new pavers across the field to make the repair less visible, and we’ll tell you honestly if a full replacement makes more sense than nursing a failing base. Estimates are free at (213) 277-6578.
A partial repair typically takes one day on site. A full paver driveway replacement in Los Angeles usually runs three to five working days, depending on the size and whether we need to export existing base material and bring in fresh aggregate. Weather in LA rarely delays the schedule; compaction and drainage work account for the majority of the timeline. We’ll give you a written arrival window before work starts and a written price before we schedule anything.
We stock common Oldcastle profiles and thicknesses, and we can source legacy or discontinued lines through our supply network in most cases. You do not need to order pavers yourself. We’ll handle measurement, color matching, and pickup so the delivery and quality are our responsibility, not yours. Call (213) 277-6578 and we’ll check availability for your specific paver size while you’re on the phone.
Contact Penhallow Remodeling Los Angeles About Your Oldcastle Driveway
If your Oldcastle driveway has a failed section, sunken spots, or cracked pavers, call us at (213) 277-6578. We’ll measure the damage, confirm the paver profile and thickness, and give you a written price for the repair before any work starts. A live person answers the phone 24/7, and every technician who arrives is background-checked and in uniform. We also stock parts for KraftMaid, Cambria, and Silestone systems, and we operate under the Kingswell standard: written price first, written guarantee included, and a 365-Day Done Right Promise on every job.
Written by Trevor Nash, Owner, Penhallow Remodeling Los Angeles at Penhallow Remodeling Los Angeles, serving Los Angeles and nearby areas.
