Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Construction in Santa Monica, CA | Penhallow Remodeling Los Angeles
We provide independent Jerith fence and railing service across Santa Monica, from Ocean Park to Sunset Park to North of Montana. Repairs, re-anchoring, gate hardware, full replacements. The thing that separates our Jerith work here: we know how Santa Monica’s marine layer and seismic retrofit ordinance interact with Jerith’s aluminum and steel systems, which changes how a post gets set and a gate gets hung. Call (213) 277-6578 for a straight answer and a written price before work starts.
Why Santa Monica Residents Choose Us for Jerith Service
Trevor Nash grew up in Crenshaw and spent two decades on residential and light commercial jobs across the Basin before starting Penhallow Remodeling. That background means we don’t send a different crew to learn on your fence. When a Jerith aluminum gate sags in the salt air or posts lean after a retrofit, we’ve seen the failure before and we know what’s actually causing it.
We’re an independent Jerith sales & service provider, not a manufacturer-authorized dealer. That matters in a specific way: we can tell you plainly when a genuine Jerith part is worth buying and when a marine-grade replacement is the smarter money. No allegiance to a parts catalog, just what holds up on a coastal Santa Monica lot. Every technician is background-checked and in uniform, and there’s a live person answering our phones 24/7. You call, you get a human.
Styles & brands we work with
Common Jerith Construction Problems We Solve in Santa Monica
- Pitting and white corrosion on aluminum posts. The marine layer doesn’t just fog your mornings. Salt air settles into any scratch in Jerith’s factory powder coat and starts working on the aluminum underneath. We see it worst on fences within a quarter mile of Palisades Park and the beach, where posts facing the ocean pit first. We strip the affected area, re-coat, and usually recommend marine-grade touch-ups on all coastal-facing surfaces.
- Leaning fence sections after seismic retrofit work. When shear walls go in on a pre-1980 soft-story building, the new foundation work shifts the ground around existing fence footings. Old wedge anchors crack, posts loosen, and a straight Jerith fence line suddenly has a wave in it. We reset posts into deeper concrete with epoxy anchors rather than patch the angle.
- Gate hinges that seize and strip. Coastal moisture gets into the self-tapping screws on Jerith’s aluminum gate hinges and corrodes the threads. By the time someone calls us, the screw heads are often stripped smooth from a previous attempt to adjust. We remove the seized hardware, re-tap the holes, and replace with genuine Jerith hinge components where the metal is still sound.
- Bottom rail rust on older Jerith steel fences. Steel Jerith fences in Sunset Park and Ocean Park yards with poor drainage trap ocean fog moisture inside the bottom rail. The exterior paint looks fine. The inside is rusting quietly. We cut out the affected rail and replace it with marine-grade aluminum so the problem doesn’t come back in three years.
- Gate posts that lean from daily wind load. On properties where the gate catches the afternoon sea breeze unchecked, a single 12-inch post set in standard concrete eventually works loose. We set replacement posts 18 inches deep, which doubles the hold. It costs a little more up front and it ends the lean.
Jerith Service in Santa Monica: What Local Conditions Mean for Your Equipment
Here’s the part that doesn’t show up on a generic Jerith page. Santa Monica’s seismic retrofit ordinance covers pre-1980 wood-frame soft-story buildings, and a lot of those properties have Jerith aluminum fences along the property line whose footings were never designed for shear-wall construction. When the retrofit crew pours new foundation footings, the ground compacts and shifts. Fence posts that looked fine for fifteen years suddenly lean, and the fence line has to come out and get re-set. It’s a hidden line item in a remodel that has nothing to do with fencing. On a 1920s Spanish-style home on Georgina Avenue in North of Montana, we got called after a Jerith fence started leaning following a foundation retrofit. The original posts were set in 12-inch concrete with wedge anchors that had cracked under the new shear-wall footing pressure. We reset all 8 posts in 18-inch-deep concrete using high-strength epoxy anchors, installed new Jerith post caps, and replaced a corroded bottom rail with marine-grade aluminum to restore the clean line. In Santa Monica, that interaction between seismic code and existing fencing is normal. In Culver City, the same remodel would never touch the fence. Here, you need a Jerith contractor who knows the retrofit ordinance well enough to quote the fence work before it surprises you.
Jerith Models & Products We Service in Santa Monica
We work on Jerith’s residential aluminum fence lines, including the 4-foot and 5-foot heights common in Santa Monica front yards, plus Jerith commercial series aluminum fence, steel fence and gate systems, and aluminum railing systems. For repairs we use genuine Jerith rails, posts, pickets, and hinge hardware so the original engineering stays intact. When a model is discontinued or a panel has corroded beyond a clean patch, we recommend replacing the section with marine-grade Jerith aluminum rather than layering on a patch that’ll fail in the salt air. We keep common Jerith fasteners and aluminum rail stock on hand for faster turnaround across the city.
See the difference
Before
After
Before
After
Before
AfterJerith Service Pricing in Santa Monica
Jerith repair pricing depends on post depth, footing condition, rust damage, and whether a permit triggers Coastal Zone review. Here’s what you can expect:
| Service | Typical Range |
|---|---|
| Jerith aluminum fence post reset with concrete | $250 – $600 |
| Jerith gate hardware replacement (hinges, latch) | $150 – $400 |
| Jerith bottom rail replacement (aluminum) | $120 – $350 |
If you need a broader project, full kitchen remodeling in Santa Monica typically runs $16,520 – $53,100, small bathroom remodels $5,900 – $14,160, and roof repair $470 – $2,125. We give a written price before work starts, not a ballpark. Call (213) 277-6578 for a number you can hold us to.
Serving Santa Monica, CA - Our Local Coverage Area
We’re based in the Santa Monica area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Jerith Construction in Santa Monica
Yes, in most cases where the retrofit includes new shear walls or foundation work, the fence line has to come out and get re-anchored. The new footings shift the surrounding soil enough that existing posts lose their grip. We handle the removal, store your panels on site, and reset the posts once the concrete work is done. It’s cheaper to plan it than to discover it mid-project. Call (213) 277-6578 to get the fence work priced alongside the retrofit.
Usually yes. Jerith’s standard colors are available through most powder coat supply houses, and we blend for sun-faded sections when a panel hasn’t gone too far. If the aluminum itself has pitted from salt exposure, a coat alone won’t hide it. We’ll tell you when replacement is the honest answer. Either way, the inspection is free.
It’s usually the post. When a gate sags, the hinge post has typically loosened in its footing or the hinges have seized from coastal moisture and the gate has been forced past them. We check both. If the post is solid, it’s a hinge replacement. If the post moves, we reset it deeper and re-hang the gate with new Jerith hardware. Call (213) 277-6578 and we’ll tell you what’s actually wrong before quoting a fix.
That depends on where the property sits relative to the Coastal Zone boundary. In Ocean Park and much of Sunset Park, any fence change beyond like-for-like repair can trigger a coastal development permit, especially if you’re changing height or material. We check the address against the city’s zoning map before we start, and we’ll tell you plainly whether the job is over-the-counter or needs review. Don’t get caught with an unpermitted fence replacement in a Coastal Zone audit.
Because the bottom rail traps ocean fog moisture and never fully dries, especially in Santa Monica yards with clay soil or poor drainage. The paint on the outside protects what you see; the inside of the rail is bare steel and it’s sitting in condensation. Steel Jerith fences within the marine influence zone rust from the inside out. We replace the bottom rail with marine-grade aluminum when this happens, because patching steel that’s already rusting inside doesn’t stop anything. Call (213) 277-6578 if you’re spotting rust-colored weep lines at the rail joints.
Service Areas Near Santa Monica
We run Jerith service across Santa Monica and the surrounding basin, so we’re in Los Angeles regularly, plus over to Burbank and through West Los Angeles. You can read about our Jerith service in Los Angeles and our Jerith service in Burbank for what changes outside the coastal zone, or check the Santa Monica service area for full coverage details.
Book Your Jerith Service in Santa Monica Today
Give you a number first, then pick up the tools. That’s how we work here. Call (213) 277-6578 for a free Jerith fence estimate in Santa Monica, and we’ll put the price in writing before any post comes out of the ground.
Written by Trevor Nash, Owner at Penhallow Remodeling Los Angeles, serving Santa Monica since 2004.
