Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Los Angeles Homeowners Choose Dvele Construction
We provide independent Dvele service in Los Angeles, specializing in remodels, roof work, and additions on Dvele’s panelized homes. Our crew has opened up Dvele wall panels and roof cassettes on real job sites across the Basin, so we know how these factory-built systems should be handled, sealed, and finished. We’re not affiliated with or authorized by Dvele, and we’ll tell you that plainly. Call (213) 277-6578 for a written estimate on any Dvele project.
What makes our Dvele work different is field experience. Dvele homes are built in a factory and assembled on your lot, which means the failure points are not the same as a stick-built house. Panel joints, crane-set roof cassettes, and integrated mechanical chases are where problems show up, and those are exactly the areas we’ve worked on. Trevor Nash, our owner, grew up in the Crenshaw district and studied construction technology at Los Angeles Trade-Technical College. He’s spent nearly two decades on residential and light commercial jobs across Los Angeles, and he’s the one who sets the standard for how we open up a Dvele panel without causing damage that costs you more money.
Why Trust Penhallow Remodeling Los Angeles for Your Dvele Construction?
Dvele homes are not assembled like conventional framing. The wall sections, floor cassettes, and roof panels are shop-fabricated and crane-set, and the tolerances are tight. Our technicians know the Dvele IQ Prefab Home, the Adaptive Series, the Accessory Dwelling Unit, and the Roof Integrated Panel System well enough to diagnose issues without exploratory demolition. That matters because exploratory demolition on a panelized home can void your warranty if it’s done wrong. We know where the panel joints are, how the factory sealing details work, and what the connection points look like from the inside.
We use Dvele-specified factory components whenever panel dimensions or connection details are involved. Those parts are proprietary, and substituting a generic framing connector or sealant at a panel joint is a quick way to create a long-term problem. For finish materials, tile, trim, and insulation, we source quality aftermarket equivalents that match the original spec. Trevor has the same conversation with every Dvele owner: we tell you what needs factory parts, what can be substituted safely, and what the price difference is before we order a single component. That’s the way we operate on every job. A written price up front, a written guarantee, and the 365-Day Done Right Promise that if something fails inside the guarantee period, we come back and make it right at no charge.
Styles & brands we work with
Common Dvele Construction Problems We Fix in Los Angeles
- Misaligned inter-panel connections causing hairline cracks at drywall seams and exterior cladding joints. This is the most common Dvele issue we see in Los Angeles. The panels are manufactured to tight tolerances, but crane setting on a hillside lot in Silver Lake or a tight infill lot in Echo Park can torque a connection enough that seams open up. Hairline cracks at drywall joints are the visible sign; the real issue is often a connection that shifted during set and is now carrying load it wasn’t designed for.
- Improper roof cassette installation leading to water intrusion at parapet flashing details. Flat-roof Dvele models, especially the ADU and some Adaptive Series configurations, depend on factory-applied sealing at the parapet flashing. If the roof integrated panel gets torqued during crane set, that factory seal breaks, and water finds its way in at the ceiling-to-wall junction. We’ve seen this exact failure in the San Fernando Valley more than once.
- Settling of shop-fabricated wall sections after transport, resulting in sticking doors and uneven baseboard gaps. Transport from the factory to a Los Angeles lot involves freeway miles and crane work, and even a well-set panel can settle slightly in the first year. If doors start sticking or baseboard gaps appear uneven, it’s usually a panel that shifted on its connection points, not a foundation problem. We check the panel connections before we adjust anything.
- Condensation buildup behind integrated window reveals due to compromised vapor barrier during field assembly. Dvele’s window reveals are integrated into the wall panels at the factory, but the field-assembled vapor barrier seam is a common weak point. When that seam isn’t fully sealed during installation, moist air gets behind the reveal, condenses, and you see staining or peeling paint around the window. The fix requires opening the reveal, resealing the barrier correctly, and checking the surrounding panel for moisture damage.
- Cracked or separated exterior cladding joints at panel transitions. Los Angeles gets intense UV exposure, and the sealants at Dvele’s exterior panel transitions take the brunt of it. Over time, the sealant degrades, cracks, and separates from the cladding, which lets water inside the wall assembly. This is a maintenance reality for any panelized home in Los Angeles, not a manufacturing defect, and it’s fixable with the right sealant and proper joint preparation.
Dvele Parts & Our Repair-vs-Replace Approach
Dvele’s structural panels are not designed for sectional repair in most cases. If a wall panel has been damaged during transport or installation, or a roof cassette has a broken factory seal, patching the surface does not restore the structural or moisture-management integrity. We are honest about when a panel or integrated assembly should be replaced rather than patched. A repair that fails in two years costs more than a replacement done right the first time.
For factory components, we use Dvele-specified parts whenever possible. The panel dimensions and connection details are proprietary, and using a generic alternative at a structural connection is a warranty risk and a safety risk. For finish materials, we stock quality aftermarket equivalents locally for faster turnaround. If you need a specific finish matched, we’ll source it. The conversation is always repair versus replace, with the price on the table before we touch a tool. Call (213) 277-6578 for an exact quote on your Dvele project.
Our Dvele Service Process – Step by Step
- 1
Diagnosis: We inspect the affected area and map it to the Dvele panel layout. If we need to open a wall or ceiling, we do it at the panel joint, not through the middle of a structural section. Dvele’s panels have specific connection points, and knowing where they are is the difference between a clean inspection and an unnecessary repair.
- 2
Repair or replacement plan: We give you a written scope of work with a line-item price before any work starts. That price is the price. If we find that a panel needs full replacement rather than repair, we stop and tell you before ordering parts. No change orders that surprise you after demo.
- 3
Repair or installation: Our crew does the work using factory-specified components for structural connections and seals. For finish work like drywall, paint, and trim, we match existing materials so the repair blends with the original Dvele finish.
- 4
Testing and verification: After the repair, we test the area. For roof work, that means water testing around parapet flashings and panel transitions. For interior work, we check for movement at panel joints and verify that doors and windows operate correctly.
- 5
Written warranty: Every Dvele job comes with our 365-Day Done Right Promise in writing. If the repair fails inside the guarantee period, we come back and fix it at no charge. That’s a standing commitment on every project, not a promotional offer.
See the difference
Before
After
Before
After
Before
AfterDvele Products We Service & Install in Los Angeles
We service and install across the Dvele product line: the Dvele IQ Prefab Home, the Dvele Adaptive Series, the Dvele Accessory Dwelling Unit, and the Dvele Roof Integrated Panel System. We handle full kitchen remodels inside Dvele homes, roof replacement and installation on Dvele roof cassettes, and home additions that tie into existing Dvele structures. We stock common sealants, flashing materials, and finish components for faster turnaround on Dvele repairs in Los Angeles, and we order factory-specified parts directly when a job requires them.
We Also Service These Brands
Penhallow Remodeling Los Angeles is a licensed General Contractor and multi-brand shop. Alongside Dvele work, we install and service KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures. If your Dvele kitchen uses any of those brands, we can handle the full scope without bringing in separate subs.
FAQs – Dvele Construction Service in Los Angeles
In most cases, replacement. Dvele’s roof integrated panels are factory-sealed at the parapet flashing and panel edges, and if that seal is broken or the panel was torqued during crane set, patching the surface will not restore the moisture barrier. We remove the damaged cassette, replace the edge sealing strips with the correct butyl tape and EPDM gasket, and reinstall with laser leveling. Call (213) 277-6578 for an inspection and a written quote.
Yes, as long as the remodel respects the panel layout. Dvele’s wall panels carry structural load, and the kitchen is often integrated with mechanical chases and plumbing runs inside the panel cavities. We plan kitchen remodels around the existing panel joints and connection points so we don’t cut into a structural section. A full kitchen remodel in a Santa Monica Dvele service area home typically runs $16,520 to $53,100 depending on cabinet line, countertop material, and layout changes.
Some settling is normal for any panelized home, especially in the first year after installation. But sticking doors and uneven floor transitions in a Dvele home often point to a wall panel that shifted on its connection points during transport or crane set. We check the panel connections first, then adjust doors and transitions only after we’ve confirmed the panels are seated correctly. Call (213) 277-6578 if your doors are sticking, and we’ll schedule an inspection.
We coordinate around them. The Adaptive Series includes integrated mechanical systems like an energy recovery ventilator and heat pump, and those systems are routed through the wall and floor panels. During a remodel, we protect those runs, work around the chases, and bring in licensed HVAC and electrical subcontractors when the mechanical systems themselves need service. We don’t claim to be HVAC techs, and we’ll tell you that before we touch anything.
Yes, and this is a growing request in Los Angeles. Dvele panelized structures can accept additions if the connection details are engineered correctly. We’ve done garage conversions and home additions in Burbank and across LA that tie into existing Dvele panels, and the key is matching the connection hardware and sealant details from the original build. Home additions in Los Angeles typically run $53,100 to $153,400, and a full ADU construction ranges from $106,200 to $259,600. We’ll give you a written line-item quote before any work starts.
The cost depends on scope, and here are the market-calibrated ranges for Los Angeles:
| Project Type | Typical Price Range |
|---|---|
| Home Addition | $53,100 – $153,400 |
| ADU Construction | $106,200 – $259,600 |
| Roof Replacement & Installation | $9,440 – $23,600 |
| Full Kitchen Remodeling | $16,520 – $53,100 |
| Small Bathroom Remodel | $5,900 – $14,160 |
These ranges reflect Los Angeles labor rates, material costs, and the extra engineering that panelized homes sometimes require. Call (213) 277-6578 for a written estimate specific to your Dvele project.
Book Your Dvele Service in Los Angeles, CA
We’ll give you a number first, then pick up the tools. Call (213) 277-6578 to schedule a free estimate on any Dvele construction project in Los Angeles. A real person answers, and you’ll get a written price before any work starts.
Written by Trevor Nash, Owner at Penhallow Remodeling Los Angeles, serving Los Angeles since 2004.
