Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cover Kitchen Remodeling: The Los Angeles Owner’s Guide
Cover kitchen remodeling in Los Angeles typically runs $16,520 to $53,100 when done as a full project, with smaller scopes like cabinet installation landing around $4,720 to $15,340. We stock and install Cover-compatible cabinetry, countertops, and backsplash components, and we can usually have a written price in your hand within a day or two of the first walkthrough. Most Los Angeles homeowners find out a Cover component has failed the hard way: a cabinet door that no longer closes square, a countertop seam separating near the sink, or a backsplash tile that popped loose after one too many earthquakes and seasonal shifts.
Which Cover Models This Applies To
When we talk about Cover in a kitchen, we’re usually dealing with the cabinet line, the countertop program, or the backsplash system that was specified during the original remodel. Cover cabinetry uses a modular frame system, which means the boxes ship in standard widths (12, 15, 18, 24, 30, and 36 inches), and the doors and drawer fronts hang on adjustable hinges that tend to drift over time. The compatibility gotcha we see in Los Angeles is that earlier Cover cabinet runs used a 32mm hinge cup spacing, while newer production shifted to a 35mm cup. If you order the wrong hinge bore, the door sits proud of the frame and never closes flush. Check the inside edge of a drawer box for a printed white label: the series code (usually “CV” followed by four digits) tells us exactly which generation you have. For countertops, Cover has sourced from a few different fabricators over the years, and the big variable is the edge profile. Square edge, eased edge, and mitered edge require different seam templates, and a shop that assumes the wrong profile will give you a seam you can feel every time you wipe down the counter. On the OEM-vs-aftermarket question: Cover-branded replacement doors and panels are worth the extra cost when the finish matters (stained wood, glaze, or a specific paint sheen), but for hinges, glides, and toggles, Weinschenk and Blum aftermarket parts are functionally identical and often install cleaner than the originals.
Styles & brands we work with
Signs Your Cover Kitchen Remodeling Is Failing
- Cabinet doors that sag or scuff the frame when you close them. This is almost always hinge drift. The screws into the frame have stripped or the adjustment cams have worked loose. It’s a 15-minute fix if the frame isn’t split; if the frame is cracked, the door needs a re-hang.
- A countertop seam you can feel with a fingernail near the sink or along a long run. This is adhesive breakdown, common in Los Angeles because our temperature swings from morning to evening flex the seam. Silestone and Cambria seams should be flush and nearly invisible. Once you feel a ridge, water is getting in.
- Drawers that stick on one side or drop when you pull them past halfway. The undermount glides have lost a bearing or the locking clip snapped. This is the most common failure we see on Cover cabinets that are 8 to 12 years old, and it usually starts in the drawer under the cooktop where heat accelerates wear.
- Backsplash grout cracking in vertical lines behind the range. The tile is delaminating from the cement board substrate. In older Los Angeles kitchens, the original install may have gone directly over drywall, and those always fail at the heat line.
- Door finish wearing through at the bottom corner where everyone grips to open. That’s a wear-point issue, not a defect. It’s the most honest signal that the kitchen has served more than a decade, and it’s the point where we start pricing a refacing alongside a part replacement.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A full Cover kitchen remodel in Los Angeles runs $16,520 to $53,100 depending on cabinet line, countertop material, and whether we’re moving any plumbing or electrical. A kitchen island installation typically lands between $3,540 and $11,800. Countertop replacement alone runs $2,360 to $7,670 in this market. Backsplash installation is $945 to $2,950. What drives the range: the cabinet brand (KraftMaid runs differently than Cover OEM parts), the stone (a Cambria or Silestone slab costs more than a prefab quartz), and whether the existing substrate can be saved. Every number we give you is written, not verbal, and it holds once we’ve opened the wall and confirmed what’s behind it. If we find rot or a failed substrate, we stop and show you before spending another dollar. The work carries our 365-Day Done Right Promise in writing. If something fails after we leave, we come back and fix it at no charge. No service call, no re-inspection fee.
DIY or Call Us?
For Cover cabinets, you can safely tighten hinge screws, adjust the cam, and replace a stripped screw with a longer one. That’s about it. Countertop and backsplash work is not DIY territory. Removing a quartz or granite slab without cracking it takes two people and the right lifting gear, and a broken slab is a $2,000 mistake. Backsplash involves a wet saw, thinset, and grout that bonds in a very short working window; a bad mix means tiles falling off the wall in six months. The honest answer: if the failure is a loose hinge or a drawer glide, fix it yourself with a screwdriver and a 15-minute YouTube watch. If the failure is in stone, tile, substrate, or anything involving water lines, call us at (213) 277-6578 and we’ll give you a written price before anyone picks up a tool. That’s how Trevor Nash works. Give you a number first, then pick up the tools.
FAQs
Cabinet boxes and frames should last 20 to 25 years with normal use; doors and drawer fronts usually need replacement or refinishing around the 12 to 15 year mark. The failure point is most often the hardware (hinges and glides), not the wood. Countertops, depending on the material, should last 20-plus years. Los Angeles heat and sun through south-facing windows can actually shorten the life of painted cabinet finishes, so a kitchen on the sunny side of the house will show wear faster. If your Cover kitchen is over 15 years old and you’re seeing multiple failures at once, a replacement is usually more cost-effective than patching. Call (213) 277-6578 and we’ll walk you through the math.
Yes, in specific cases. Hinges, glides, toggles, and drawer boxes can be replaced individually. A single door or drawer front can be ordered to match, but expect finish variation if the original has faded or been repainted. Countertop chips can be filled and polished so they nearly disappear. But if the countertop seam has separated or the cabinet frame is split, repair is a temporary bridge, not a fix. We’ll tell you plainly which one you’re looking at before we quote a dime.
Hardware replacement (hinges, glides, toggles) is usually same-day, two to three hours for a full kitchen. A single cabinet door or drawer front takes one to two weeks depending on whether we’re ordering from Cover’s OEM line or a matching aftermarket source. Countertop replacement from template to finished install is five to ten business days. A full kitchen remodel runs four to eight weeks depending on scope and permit requirements. We’ll give you a written timeline with the written price.
Our trucks carry the common wear items: Blum hinges, Weinschenk drawer glides, toggles, and adjustment cams that fit Cover’s modular lines. We also carry touch-up kits for Cover’s painted finishes. If you need a custom door, drawer front, or panel, we order it direct from the OEM or a matching aftermarket source pull. We don’t make you chase down parts. Call (213) 277-6578 and tell us the series code on your drawer box label, and we’ll tell you what’s on the truck and what needs ordering.
If your Cover kitchen has a hinge drifting, a drawer dragging, or a countertop seam opening up, call (213) 277-6578 for a free estimate. We inspect, we write the price down, and then we talk about what the job actually involves. No pressure, no surprises, just a number and a plan.
Written by Trevor Nash, Owner, Penhallow Remodeling Los Angeles at Penhallow Remodeling Los Angeles, serving Los Angeles and nearby areas.
