Boral Windows & Doors Nationwide

Boral Windows & Doors: The Los Angeles Owner’s Guide

If you have a Boral window or door that’s sticking, leaking air, or has a failed component, we can source and install the correct replacement part, usually within a few days depending on the model. Installed pricing for Boral window and door component replacement in Los Angeles typically runs $470 to $2,125 for most hardware, seal, and track repairs, while full unit replacement falls in the $5,310 to $17,700 range. Owners usually discover a problem the hard way: a sash that won’t stay up, a lock that no longer catches, or a door that suddenly drags against the frame after years of working fine. What looks like a small annoyance is often a worn balance, a failed roller, or a compressed weather seal, and the good news is these are replaceable parts, not reasons to buy a whole new window.

Call (213) 277-6578

Which Boral Models This Applies To

Boral’s window and door lines share hardware families across several product generations, so the trick is identifying your specific series before ordering anything. Check the corner of the glass or the edge of the door panel for an etched label or a small sticker; Boral prints the product code there on most units made in the last fifteen years. Write that number down before you call anyone. The compatibility gotcha with Boral is the balance system: early-generation single-hungs use a block-and-tackle balance, while later models switched to a constant-force coil, and the two do not interchange even if the window looks identical from the outside. For a replacement, we spec OEM parts when the window is under ten years old or when the frame is still in warranty, because that keeps any manufacturer coverage intact. For older units or discontinued trim packages, we use name-brand aftermarket equivalents from the same supply houses we already pull KraftMaid, Cambria, and Silestone-compatible hardware from, and we’ll tell you plainly if the aftermarket part is a better value than the OEM tag. Penhallow Remodeling Los Angeles is an independent service provider, not affiliated with Boral, which means we source parts based on what fits and lasts, not what a single brand catalog pushes.

Signs Your Boral Windows & Doors Is Failing

• The sash drops when you let go. That’s a failed balance, not a dirty track. Boral balances wear out under daily use, and here in Los Angeles the dry air and UV exposure accelerate spring fatigue faster than coastal humidity ever will.
• You can feel a draft even when the window is closed. The weatherstripping or the perimeter seal has compressed past its service life. Boral’s seal profiles are specific to each series, so a generic foam strip from the hardware store won’t seat properly in the channel.
• The lock or multi-point hardware fights you. Boral door hardware is milled to tight tolerances, and once the door settles a few millimeters, the lock points bind against the strike plate. Forcing it eventually strips the gearbox inside the handle.
• The door drags or scrapes along the threshold. Roller wear and hinge sag both cause this. On Boral sliding and French doors, the rollers are a consumable part; we replace them before they grind flat and score the track itself.
• Condensation appears between the glass panes. That’s a failed insulated glass unit seal, not a humidity problem inside your house. Once the desiccant in the spacer is saturated, the fog never clears on its own, and the glass needs to be replaced as a sealed unit.

Replacement Cost & What’s Included

For Boral component-level repair in Los Angeles, expect $470 to $2,125 installed depending on whether we’re replacing a single balance, a full set of rollers, a lock gearbox, or a combination of parts on one unit. A full Boral window replacement runs $5,310 to $17,700 depending on size, glass package, and whether we’re matching an existing finish. What drives the number up: multi-point door hardware, oversized picture windows, low-E or impact-rated glass, and stucco or trim work needed to integrate the new unit cleanly. What drives it down: standard sizes, single-hung or sliders, and parts that are still in active production. Every quote is a written price before we start; the number on day one is the number on the invoice. The work itself carries our 365-Day Done Right Promise in writing, and if a repair fails inside that window, the second visit is free, no service call, no re-inspection fee.

DIY or Call Us?

You can safely check a few things yourself: verify the product code label, note where the unit binds or drags, and check whether the problem affects one window or every window of the same age. What you shouldn’t do is open the balance cavity or remove a sash without knowing which balance system you have; the coil springs inside a constant-force balance are under tension, and they release fast when the housing comes apart. The same goes for multi-point door hardware. That gearbox sits under spring tension, and a stripped screw or mis-clocked mechanism turns a $300 repair into a $1,200 door replacement. If you want us to take a look, call (213) 277-6578 and describe the symptom. Trevor Nash grew up in the Crenshaw district and spent enough weekends helping his uncle re-frame doorways to know that Boral hardware follows its own rules; we’ll give you a number first, then pick up the tools.