Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ActiveYards Kitchen Remodeling: The Los Angeles Owner’s Guide
ActiveYards kitchen remodeling in Los Angeles typically runs $16,520 – $53,100 installed, depending on cabinet line, countertop material, and whether we’re moving plumbing or walls. We stock ActiveYards-compatible cabinetry hardware, hinges, drawer slides, and trim, and we can usually match your existing configuration within one visit to measure and a second to install. Most Los Angeles homeowners call us after a hinge snaps, a drawer slide binds, or a cabinet face delaminates from years of dry heat and kitchen humidity cycles.
Penhallow Remodeling Los Angeles is an independent contractor, not affiliated with ActiveYards. That matters because we match parts honestly: if your ActiveYards cabinet is under its original warranty, we’ll tell you to file that claim first and we’ll do the install either way. If it’s out of warranty, we source the correct OEM spec or a proven aftermarket equivalent so your doors hang square and your drawers close like they did the day the kitchen went in.
Key takeaways:
- ActiveYards parts we handle: hinges, drawer slides, door and drawer fronts, filler panels, toe kicks, and matching trim.
- Installed kitchen remodel range in Los Angeles: $16,520 – $53,100, with a written price before we start.
- We carry common ActiveYards hinge and slide patterns on the truck; specialty finishes take 5 – 10 days to source.
- Every repair and remodel includes our 365-Day Done Right Promise in writing.
Which ActiveYards Models This Applies To
ActiveYards builds cabinetry in a few distinct series lines, and the hardware varies by line and production year. The most common ActiveYards lines we see in Los Angeles kitchens are their standard overlay, full overlay, and inset-door series. The hinge type is the give-away: standard overlay uses a wrap hinge or concealed compact hinge, full overlay uses a concealed European cup hinge with a larger overlay plate, and inset uses a non-mortise or concealed hinge with a zero-crank design. If you don’t know your line, open a cabinet door and look for a laser-etched code on the hinge plate or a sticker inside the drawer box. The hinge bore pattern (typically 35mm for ActiveYards concealed hinges) tells us more than the series name does.
One compatibility gotcha we warn Los Angeles owners about: ActiveYards changed drawer slide profiles around 2019 on some full-overlay lines. The older slides mount to the cabinet floor with a rear bracket; the newer ones clip to the drawer box bottom with a front and rear clip. They look similar from the outside but do not interchange. Bring us a photo of the slide with the drawer out, and we’ll tell you which one you have before we order anything. On the OEM-versus-aftermarket question: for hinges and slides, we generally recommend OEM or a spec-identical Salice or Blum equivalent, because the hole patterns and overlay geometry are unforgiving. For decorative trim and filler panels, a quality aftermarket match is usually invisible once finished.
Styles & brands we work with
Signs Your ActiveYards Kitchen Remodeling Is Failing
- A cabinet door won’t stay closed or hangs crooked. The hinge spring or the hinge cup has fatigued, or the mounting screws have stripped the bore holes in the door. In Los Angeles kitchens we see this most on doors near the oven or dishwasher, where repeated heat and steam cycles work the hinge loose.
- A drawer sticks, shudders, or drops on one side. The slide rollers or ball bearings are worn, or the rear mounting bracket has pulled loose. ActiveYards slides run dry from the factory; once dust and cooking grease accumulate, they bind and grind.
- The cabinet face or door panel is delaminating or peeling at the edges. Thermafoil and laminate surfaces break down faster in dry, hot SoCal air, especially near south-facing windows. Once water vapor gets under the laminate, the panel swells and the finish is done.
- A drawer front has cracked or the corner joint has opened. This is usually mechanical stress: an overloaded drawer, a child hanging on it, or a slide that failed first and let the box torque against the face.
- Doors are uneven across a run, with gaps that change by season. The cabinet boxes have shifted, or the original install didn’t account for Los Angeles’s dry-summer/wet-winter expansion cycles. Sometimes it’s just hinge adjustment. Sometimes it means the box itself has come loose from the wall.
Replacement Cost & What’s Included
ActiveYards-specific kitchen remodeling in Los Angeles carries the same range as a full kitchen remodel: $16,520 – $53,100. What drives that number up or down is scope, not brand. Replacing hinges and slides on twenty doors and drawers runs at the bottom of that range. Replacing doors and drawer fronts across a full kitchen sits in the middle. Refacing or rebuilding cabinet boxes, moving plumbing, or installing new countertops pushes you toward the top.
Every price we give is written before we start, and it stays that number unless you change the scope. That written price includes the parts, the labor, the cleanup, and a written guarantee. For part-only repairs we price the part and the labor separately on the invoice, so you can see exactly what the hardware costs and exactly what we charge to install it. The work is covered by our 365-Day Done Right Promise: if a hinge fails or a drawer binds inside that year, we come back and fix it at no charge. No service call fee, no re-inspection charge, no argument.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Cabinet hardware is one of the few kitchen components where a careful homeowner can do part of the job safely. Adjusting hinge screws, tightening a loose slide bracket, or replacing a soft-close damper is straightforward if you have the right screwdriver and some patience. What we tell Los Angeles owners is this: if you can see the problem and you can reach it with ordinary hand tools, try the adjustment first. If the hinge is bent, the slide is broken, or the door is delaminating, stop and call us.
Where DIY goes wrong on ActiveYards cabinetry is usually the bore holes. Once a hinge screw strips its hole in a thermofoil door, the fix is not a bigger screw; it’s a repair adhesive and a redrilled cup, and doing that wrong ruins the door. We also see homeowners order the wrong slide profile because the old one looked “standard” in an online photo. We’re happy to identify the part over the phone from a photo, free. If the job goes beyond that, call (213) 277-6578 and we’ll come measure, quote, and finish it before your kitchen stays out of commission any longer than it has to.
FAQs
ActiveYards cabinet boxes and doors typically last 15 – 25 years in Los Angeles homes, with hinges and drawer slides needing replacement somewhere in years 8 – 12. The dry inland heat and the moisture swings in coastal neighborhoods like Santa Monica and the Palisades shorten the life of thermofoil finishes faster than the manufacturer’s climate-neutral estimates suggest. The boxes themselves rarely fail before the hardware does.
Yes, in most cases. Hinges, slides, and drawer fronts are repair jobs. Delaminated doors and split boxes are replacement jobs. We’ll tell you honestly which one you have when we see it, and the repair price will be on paper before we touch a drawer. Call (213) 277-6578 and we’ll look at photos and give you a straight answer.
Hinge and slide replacement across a standard Los Angeles kitchen takes one visit of 3 – 6 hours, assuming we have your pattern on the truck. Door and drawer front replacement runs 3 – 6 weeks because the new faces are ordered to match your line and finish. A full kitchen remodel is 6 – 12 weeks depending on cabinetry lead times, countertop fabrication, and whether plumbing or electrical moves.
We stock the common ActiveYards hinge patterns, slide profiles, bumpers, and soft-close dampers on the truck. Specialty finishes, custom door sizes, and older series hardware that ActiveYards has since revised are ordered per job, typically 5 – 10 days out here in Los Angeles. If we don’t have it, we’ll give you the lead time up front and a written price before ordering anything. Call (213) 277-6578 with a photo of the part and we’ll tell you what we have.
Start With a Written Number
If your ActiveYards kitchen cabinetry is failing, start with a free estimate from Penhallow Remodeling Los Angeles. Trevor Nash and our team will look at the part, name it correctly, and give you a written price before any work begins. We also stock and install parts compatible with KraftMaid, Cambria, and Silestone surfaces. Give you a number first, then pick up the tools. Call (213) 277-6578 to schedule your free estimate.
Written by Trevor Nash, Owner, Penhallow Remodeling Los Angeles at Penhallow Remodeling Los Angeles, serving Los Angeles and nearby areas.
