Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ActiveYards Bathroom Remodeling: The Los Angeles Owner’s Guide
If you have an ActiveYards bathroom remodel component that’s failing, we can match it, price it, and install it. A full ActiveYards bathroom remodel in Los Angeles typically runs $10,620 – $33,040 depending on scope, materials, and what’s behind the existing walls. Most overflow or drainage failures we see in ActiveYards systems are caught when a homeowner notices water staining at the base of a vanity, a slow drain that won’t clear, or grout that keeps cracking along the shower pan seam. The bad news is that by the time you see the stain, water has usually been working behind the surface for a while. The good news is that these failures release in stages, so you almost always have time to act before anything structural gives way.
Key takeaways:
- We stock ActiveYards replacement pans, trim kits, and shower bases in our Los Angeles shop.
- Installed pricing is written before we start. The number on day one is the number on the invoice.
- Every ActiveYards repair or remodel carries our 365-Day Done Right Promise in writing.
- Penhallow Remodeling Los Angeles is an independent contractor, not affiliated with ActiveYards. We install and service their products because they’re built well and parts stay available.
Which ActiveYards Models This Applies To
ActiveYards makes bathroom components under several series names, and Los Angeles homes tend to have one of three: the Essential series (entry-level, thinner pan walls, common in rental rehabs and flips), the Pro series (mid-grade, heavier acrylic, used in most mid-range remodels), and the Elite series (reinforced pans, integrated tile flanges, more common in master baths in places like Silver Lake and the Valley). The easiest way to identify your model is to look for the small etched label on the underside of the shower pan or the back panel of the vanity cabinet. If the label is gone or unreadable, measure the pan’s drain offset and the wall panel thickness. The Pro and Elite series run a 3/16-inch wall panel; Essential runs thinner, and that difference matters when ordering trim kits.
For ActiveYards specifically, we recommend OEM (original manufacturer) parts over aftermarket equivalents about 80% of the time. Their drain assemblies and pan flanges have slightly non-standard dimensions. An aftermarket pan may fit the footprint but leak at the drain collar because the gasket seat is shallow. The one exception is shower trim and cartridge hardware, where we often use Delta or Moen replacements that meet or beat the OEM spec at $35 – $70 less per piece.
Styles & brands we work with
Signs Your ActiveYards Bathroom Remodeling Is Failing
- Water staining at the base of the vanity or along the shower curb. This usually means the pan seal has released or a supply line behind the vanity is weeping. It’s the most common failure we see in Los Angeles homes built before 2010, where original silicone has aged out.
- Grout cracking repeatedly in the same seam. ActiveYards pans flex slightly with temperature swings. In Los Angeles, where summer heat hits the slab and winter nights drop into the 40s, that flex eventually breaks the bond between pan and tile.
- A slow drain that snaking won’t fix. The ActiveYards Essential series uses a corrugated drain collar that collects hair and soap scale faster than the smooth-bore Pro and Elite versions.
- Squish or softness underfoot in the shower pan. The subfloor beneath the pan is absorbing moisture. By the time you feel it, the damage below has been ongoing for months.
- Musty odor that returns after cleaning. That’s trapped moisture behind a wall panel, not surface grime. The fix requires removing and re-flashing the panel.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
An ActiveYards shower pan replacement in Los Angeles runs $3,540 – $10,030 installed, which includes the pan, drain assembly, demo of the old unit, and haul-off. A full tub-to-shower conversion using ActiveYards Pro series materials runs $4,130 – $11,800. A complete bathroom remodel built around ActiveYards components lands in the $10,620 – $33,040 range depending on whether you’re also replacing the vanity, floor tile, and fixtures. What drives the number is what’s behind the walls: if the pan has been leaking into the subfloor, you’re paying for plywood replacement and possibly joist repair before the new pan goes in. That’s the honest part most Los Angeles contractors leave out of the initial bid. We don’t.
Every ActiveYards replacement includes a written line-item quote before work starts, our 365-Day Done Right Promise in writing, and a free return visit if the repair fails inside that year. No service call charge, no re-inspection fee.
| ActiveYards Service | Los Angeles Installed Range |
|---|---|
| Shower pan replacement | $3,540 – $10,030 |
| Tub-to-shower conversion | $4,130 – $11,800 |
| Walk-in shower installation | $5,310 – $14,160 |
| Full bathroom remodel (ActiveYards) | $10,620 – $33,040 |
| Vanity + countertop replacement | $945 – $7,670 |
DIY or Call Us?
You can safely check a few things yourself: confirm the model label on the pan, note where the water stain starts, and test whether the drain collar is loose by hand. That’s all useful information for us. What you shouldn’t do is pull a shower pan or wall panel yourself if you’re not experienced with plumbing and waterproofing. The trap seal and drain flange on ActiveYards pans are specific, and an improperly set gasket leaks within weeks. We’ve also seen homeowners cut into a wall panel looking for a leak and hit a supply line. If you’re not sure, call (213) 277-6578 and describe what you’re seeing. We’ll tell you over the phone whether it’s worth a service visit, and if it is, you’ll get a written price before we start.
FAQs
An ActiveYards pan installed correctly in Los Angeles typically lasts 15 – 25 years. Heat and hard water shorten the lifespan, and pans in homes with slab foundations, like many in the San Fernando Valley, tend to fail at the drain collar slightly sooner than pans on raised foundations.
In some cases, yes. If the leak is at the drain collar and the pan itself is sound, we can sometimes re-seat the gasket and re-flash the collar for $710 – $2,950. If the leak has been running long enough to damage the subfloor, replacement is the only honest fix.
Most ActiveYards pan replacements in Los Angeles take 1 – 2 days from tear-out to a working shower. Full tub-to-shower conversions run 2 – 3 days. If subfloor repair is needed, add a day.
We stock common ActiveYards Pro and Elite series pans, drain assemblies, and trim kits in our Los Angeles shop. Less common sizes and Essential series replacements are usually 3 – 5 business days out from our distributor. We’ll tell you which situation applies before you commit to anything.
If your ActiveYards bathroom component is failing, call (213) 277-6578 and we’ll give you a number first, then pick up the tools. We also stock parts and provide remodel services for KraftMaid cabinetry, Cambria and Silestone countertops, and the full range of bathroom and kitchen work we do across Los Angeles. Written estimate, written guarantee, real arrival window. That’s the whole deal.
Written by Trevor Nash, Owner, Penhallow Remodeling Los Angeles at Penhallow Remodeling Los Angeles, serving Los Angeles and nearby areas.
