Dvele Fence Installation Nationwide

Dvele Fence Installation: The Los Angeles Owner’s Guide

Dvele fence installation in Los Angeles typically runs $4,130 to $10,620 installed, depending on fence style, linear footage, and whether we’re matching an existing Dvele perimeter system or starting fresh. We stock Dvele-compatible fence hardware and panels on our trucks, and most installations are completed in one to two days once materials are confirmed. The call usually starts the same way: a homeowner notices a gate dragging, a post leaning after the winter rains, or a fence section that no longer sits flush with the stucco line on their Dvele home.

Call (213) 277-6578

Dvele builds high-performance modular homes with exacting exterior details, and their fence and landscape integration is part of what makes the curb appeal work. When a fence section fails, it sticks out against that clean Dvele geometry. Trevor Nash has walked more than a few Los Angeles properties where the fence was the only thing throwing off the line of the house. Fixing it right matters more than most owners expect.

Key Takeaways

• Installed Dvele fence replacement in Los Angeles: $4,130 – $10,620, with most projects landing between $5,900 and $8,200.
• We’re an independent contractor, not affiliated with Dvele, but we stock hardware that matches Dvele perimeter fencing specs.
• Written price before any work starts, and the 365-Day Done Right Promise in writing on every job.
• Call (213) 277-6578 for a free estimate. A live person answers.

Which Dvele Models This Applies To

Dvele homes across Los Angeles, from the hillside lots in Mount Washington to the newer infill builds in Jefferson Park, share a common exterior language: clean stucco lines, modern horizontal siding, and perimeter fencing that reads more architectural than utilitarian. The fence systems we work on most often are the horizontal slat privacy fences and the aluminum-framed gate systems that Dvele specifies on their standard and custom plans.

The compatibility gotcha is this: Dvele fencing is not a single proprietary product line the way a Dvele window or door might be. Depending on build year and lot, the fence may be cedar, composite, or powder-coated aluminum, and the gate hardware is typically sourced from standard commercial-grade suppliers. That’s good news for owners, because it means quality aftermarket parts exist. The trick is matching the post dimensions and gate hinge throw correctly. We measure everything on site before quoting, and we carry common gate hinge sets, post anchors, and panel fasteners on the truck so we’re not making two trips.

If you’re trying to identify what you have, check the gate hinge plates for a manufacturer stamp, and measure the post spacing. A 6-foot on-center post layout with horizontal slats is the most common Dvele configuration we see across Los Angeles, but we’ve also worked on custom vertical-rod fences on newer Dvele lots in Silver Lake.

Signs Your Dvele Fence Installation Is Failing

Most fence failures give you warning signs before a full section comes down. Here’s what we see most often across Los Angeles yards:

• Gate dragging or sticking: The hinge post has shifted, usually because the footing wasn’t deep enough for the soil type or a tree root has pushed against it. In Los Angeles’ clay-heavy soil, we see this more after winter saturation and summer drying cycles.
• Post lean at the stucco connection: A fence post pulling away from the house means the anchor bolts or the embedment have moved. This is the one to address early, because a leaning post will eventually crack the stucco corner it’s attached to.
• Bowed or warped slats: On wood fences, this means moisture got in faster than it could get out. Direct sun on one side and damp soil splash on the other creates exactly this warp pattern in Los Angeles, especially on west-facing fence runs.
• Rusted hardware at the hinges or latches: Coastal air a few miles inland still carries enough salt to eat hardware faster than owners expect. If the gate squeaks and the hinge pins are rusted, the metal is already compromised.
• Panel gaps opening at the seams: The fence is settling unevenly, which usually means the post footings were poured at different depths or without rebar. This is a structural issue, not a cosmetic one.

Replacement Cost & What’s Included

For a Dvele-compatible fence replacement or new installation in Los Angeles, you’re looking at $4,130 to $10,620 installed. Where you land depends on three things: linear footage, material (cedar runs lower, powder-coated aluminum runs higher), and how much of the old footing work needs to be redone rather than reused.

Here’s how that range breaks down:

• Gate replacement only (hardware + one gate panel): $945 – $2,360
• 30 linear feet of horizontal slat privacy fence, including new posts: $4,130 – $5,900
• 60 linear feet, mixed gate and fence, aluminum or composite: $5,900 – $8,260
• Full perimeter replacement with two gates and footing repair: $8,260 – $10,620

Every quote includes the written price before work starts, the materials, labor, job-site cleanup, and the 365-Day Done Right Promise. If the fence fails within that year, we come back and fix it at no charge. And if a repair we’ve made fails, the second visit is free, no service call, no re-inspection fee. You’ll have that in writing.

FAQs