Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Barrette Roofing: The Los Angeles Owner’s Guide
If you’re holding a failed Barrette roofing component, here’s what you need to know: we stock and install Barrette-compatible roofing parts across Los Angeles, with typical installed replacement costs running $470 – $2,125 depending on the part and roof access. Most owners discover a Barrette failure the same way, a damp spot on the ceiling after the first real rain, or granules collecting in the gutter after a wind event. You’ll find we keep the common Barrette profiles on hand and can usually match your existing product same-week.
Barrette manufactures a range of roofing and exterior products, and in Los Angeles we see their ridge caps, roof edge flashings, and vent systems more than anything else. The failure point is rarely the product itself. It’s the sealant at the seams, a fastener backing out after years of thermal cycling, or UV degradation from our relentless sun. Penhallow Remodeling Los Angeles is an independent service provider, not affiliated with Barrette, which means we can match your part honestly and tell you when an aftermarket equivalent is just as good, or when you’re better off staying with OEM.
Which Barrette Models This Applies To
Barrette’s roofing line spans ridge vent systems, drip edge profiles, gable vents, and specialty flashing components. The compatibility gotcha most Los Angeles homeowners hit is this: Barrette changed their ridge vent profile dimensions around 2018, and the newer version sits about a half-inch lower than the original. If your roof was installed before that, a new ridge vent piece from a big-box shelf won’t seat correctly against older shingle courses. We measure the vent throat and the shingle exposure before ordering anything.
To identify your Barrette part, look for a stamped product code on the underside of the vent or flashing. Most Barrette components carry a small embossed identifier, something like “BV-9” for their standard ridge vent or “DE-2” for the drip edge. If the stamp has worn off (common after a decade of Los Angeles heat), we match by measuring the profile depth, the nail flange width, and the vent opening. That’s the difference between a part that clicks in and one that leaks at the first winter storm.
For replacement parts, we recommend OEM Barrette for anything that seals against the roof deck: ridge vents, transition flashings, and pipe collars. For non-structural pieces like plastic gable vent screens, quality aftermarket equivalents perform identically and save you real money. We also stock compatible parts for KraftMaid, Cambria, and Silestone products, but roofing is its own animal, and Barrette compatibility is where we focus here.
Styles & brands we work with
Signs Your Barrette Roofing Is Failing
- Water staining at the ridge line. This almost always traces to a cracked Barrette ridge vent or a failed end-cap seal. The vent’s plastic gets brittle after seven to ten years of Los Angeles UV exposure, and the expansion-contraction cycle opens hairline cracks at the seams.
- Granules in the gutter after wind. Barrette roof edge flashings can lift at the corners when the fasteners back out. Once the flashing lifts, shingle edges lose support and start shedding granules into your gutters.
- Musty attic smell after rain. A failed Barrette gable vent lets moisture in without an obvious ceiling stain. The vent screen can separate from the frame, and water wicks along the framing into the attic insulation.
- Visible daylight through the ridge vent from inside the attic. If you can see a gap wider than the vent baffle, the filter material has failed or the vent has shifted. This is a roof-access check, not something we want homeowners walking the ridge to inspect.
- Rust streaks below the roofline. Older Barrette drip edges were galvanized, and once the galvanizing wears through, the steel rusts. The rust stains your fascia and eventually the drip edge loses its kick-out, letting water ride back under the shingle course.
Replacement Cost & What’s Included
Barrette roofing part replacement in Los Angeles typically runs $470 – $2,125 installed. That range covers everything from a single vent screen swap at the low end to a full ridge vent replacement on a two-story home with difficult access at the high end. Here’s the breakdown:
| Job | Typical Installed Cost |
|---|---|
| Barrette gable vent screen replacement | $470 – $825 |
| Barrette drip edge replacement (per 50 linear feet) | $590 – $1,180 |
| Barrette ridge vent replacement (per 30 linear feet) | $825 – $1,650 |
| Barrette pipe collar or flashing replacement | $470 – $1,060 |
| Full ridge vent replacement, two-story access | $1,180 – $2,125 |
The price includes the part, labor, sealant, fasteners, and disposal of the old component. What drives the range up is roof pitch, two-story access, and whether we’re matching a pre-2018 profile that needs to be ordered rather than pulled from the truck. Every job gets a written price before any work starts, and the number on day one is the number on the invoice. Our 365-Day Done Right Promise covers the work in writing: if the replacement fails inside a year, we come back and fix it at no charge.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Let’s be plain about this: anything that requires walking the roof is not a DIY job. Ridge vents, drip edges, and pipe collars sit at the roof line, and a fall from a two-story Los Angeles home changes your life in a second. We train our crews on roof safety, and we carry the insurance and fall protection for it.
What you can safely check from the ground: whether the gutter is clear, whether you see daylight under the drip edge from the ladder-free side, and whether the gable vent screen is intact from inside the attic. If you see any of the signs above, call us at (213) 277-6578. Trevor Nash has been crawling Los Angeles roofs long enough to tell you honestly whether it’s a thirty-minute fix or a full afternoon. Give you a number first, then pick up the tools.
FAQs
Barrette roofing components typically last ten to fifteen years in Los Angeles, but the UV exposure and thermal cycling here can cut that to seven or eight years for plastic vent components. Metal drip edges last longer, often twenty years or more, assuming the fasteners hold and the galvanizing stays intact. Call (213) 277-6578 and we’ll inspect yours before you spend on a replacement.
Yes, in some cases a Barrette ridge vent with a cracked end cap or failed sealant bead can be repaired with a compatible replacement cap and fresh sealant, but the repair only makes sense if the vent body is still intact. If the vent plastic has gone brittle or the filter material has separated, replacement is cheaper than chasing a patch that fails again next season. We’ll tell you which one applies to your roof before we quote anything.
Most Barrette roofing part replacements take two to four hours on site, from setup to cleanup. A full ridge vent replacement on a two-story home with steep pitch can run a full day. We set a written arrival window before the job, and our crews leave the roof and gutter line cleaner than they found it.
We stock the common post-2018 Barrette ridge vent profiles, drip edges, and gable vent screens on the truck, so most Los Angeles jobs get done the same week we diagnose. Pre-2018 profiles and specialty transition flashings usually take three to five business days to source. We never charge a markup on parts we order, you see the parts cost as a line item on the written quote.
Get Your Free Barrette Roofing Estimate
If you’ve got a failed Barrette component and you want a straight answer on what it costs to fix, call (213) 277-6578. We’ll schedule a free estimate, put the number in writing before any work starts, and back the repair with our 365-Day Done Right Promise. A live person answers the phone 24/7, no voicemail maze, no callback window.
Written by Trevor Nash, Owner, Penhallow Remodeling Los Angeles at Penhallow Remodeling Los Angeles, serving Los Angeles and nearby areas.
