Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wellborn Driveway & Pavers: The Los Angeles Owner’s Guide
Wellborn-compatible driveway paver repair and installation in Los Angeles typically runs $8260 to $21240, depending on square footage, paver style and how much of the existing base needs to be rebuilt. We keep common paver profiles and matching edge restraints on hand, and we can usually start a repair or replacement within a week of your written estimate. Most Los Angeles homeowners discover a problem the same way: a low spot forms after winter rains, a paver cracks under the weight of a delivery truck, or the sand between joints washes out and every step sends grit across the garage floor.
If you’re seeing any of that, you’re in the right place. This page covers which Wellborn-style paver systems we work with, what fails first in Southern California’s dry heat and hard rain cycle, what a real repair costs in Los Angeles, and how we handle the job from written price to final walkthrough.
Which Wellborn Models This Applies To
Wellborn is primarily known for cabinetry, not paver manufacturing, so when we talk about Wellborn driveway and pavers in the Los Angeles market, we’re usually matching the paver style, color and sizing on a home where Wellborn cabinets were part of the same remodel package. Homeowners often have a Wellborn kitchen or bathroom remodel paired with a paver driveway installed by the same general contractor using a trade paver line like Belgard or Unilock. That said, if your pavers carry a Wellborn label or were sold through a Wellborn supplier, we match the profile and dimensions the same way we do for any other manufacturer.
The important part is measurement, not the label. Standard pavers run 4" x 8" (100mm x 200mm) or 6" x 9" (150mm x 225mm), with driveway-rated thickness of 60mm or 80mm. Patio-grade pavers at 40mm or 50mm are not built for vehicle weight and will fail quickly if used on a driveway. We always check paver thickness before quoting a repair, because pumping a repair into pavers that were undersized from day one just means paying twice. OEM versus aftermarket matters less for pavers than for cabinet hardware; what matters is a matching color blend and a consistent paver thickness so the repaired area settles at the same rate as the surrounding field.
Styles & brands we work with
Signs Your Wellborn Driveway & Pavers Is Failing
- Low spots or standing water after rain. Los Angeles gets short, intense downpours, and any area where water pools for more than an hour after the rain stops is telling you the sand base beneath has compacted or washed out. Left alone, that section will sink further and begin pulling neighboring pavers out of level.
- Cracked or chipped pavers near the driveway edges. Edge pavers take the brunt of vehicle weight when a tire drifts off the concrete apron. If you see cracking at the edge course, the edge restraint has likely failed and the whole field is starting to shift outward.
- Sand migrating out of the joints. After heavy rain or a good hose-down, you see little fans of sand spreading across the paver surface. That’s polymeric joint sand failing, and it’s the first step toward pavers rocking underfoot and water getting under the base.
- Rocking or wobbly pavers when you walk across. A stable paver field feels solid and quiet. If pavers click or rock under your shoes, the bedding sand layer has developed voids, and the problem will only spread as more water follows the gaps.
- Weeds pushing up through the joints. Weeds are not a separate problem; they are the symptom of failing joint sand. Once the sand is gone, weed seeds find daylight and roots, and those roots wedge pavers apart faster than any other single factor we see in Los Angeles driveways.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s the honest math for Los Angeles. A full paver driveway replacement runs $8260 to $21240 depending on square footage, access and how much of the existing base we can salvage versus rebuild. Smaller repairs, like resetting a sunken section or replacing a dozen cracked pavers, land in the $590 to $1500 range when the base is still sound. The number moves when we have to remove and re-grade the crushed rock base, haul off old material, or match a paver color that’s no longer in production.
Every quote we write in Los Angeles includes the pavers, bedding sand, joint sand, base work if needed, edge restraint, clean-up and a written warranty on the work. Our pricing includes a written line-item breakdown before we start, and under the Kingswell standard, the number on that sheet is the number on your invoice. If anything changes mid-job, we stop and put the new number in writing before we pick up another tool.
DIY or Call Us?
A homeowner can replace a single cracked paver if they have matching spares and the patience to re-bed it level. You can also re-apply polymeric joint sand to a small area if surface weeds are the only issue. What you shouldn’t DIY is anything involving a sunken or shifting paver field. That almost always means the base underneath has failed, and scraping pavers off a failing base without rebuilding it just hides the problem for another season. Paver work is not dangerous the way a high-tension garage spring is, but it is backbreaking and precision-dependent; a field off by a quarter-inch at the corner reads as a wave through the whole driveway.
If you have a section that’s moved, call us at (213) 277-6578 for a free second look. Trevor Nash has been reading failing paver bases across Los Angeles for over two decades, and he’ll give you a number first, then pick up the tools.
FAQs
A properly installed paver driveway with 60mm or 80mm pavers over a compacted crushed rock base lasts 25 to 40 years in Los Angeles, often outlasting poured concrete because pavers flex and settle without the large cracks concrete develops. Joint sand needs re-topping every 3 to 5 years, but the pavers themselves rarely need replacement. Call (213) 277-6578 if you want us to assess the remaining life of your existing field; estimates are free.
Yes, if the pavers are intact and the base failure is localized to one section. We lift the affected pavers, re-grade and compact the base, then re-bed and re-sand the area so it blends with the surrounding field. The catch is that a poorly matched color or thickness will show, so we always confirm paver dimensions and source a matching blend before we quote. Call (213) 277-6578 and we’ll tell you honestly whether a spot repair will hold or the whole field needs resetting.
A localized repair of 50 to 100 square feet usually takes one full day, including demolition of the affected area, base work, re-bedding and joint sand. A full driveway replacement typically runs 3 to 5 working days depending on size and access. Weather in Los Angeles rarely stops paver work the way it does roofing, but we do schedule around any forecast of heavy rain so fresh joint sand has time to cure.
We keep common 4" x 8" and 6" x 9" driveway pavers in standard Los Angeles color blends on hand, and we work with Belgard and Unilock distribution for exact matches when a field is older or a color has shifted. If the manufacturer has discontinued your exact paver, we can often blend two adjacent colors close enough that the repair disappears from the curb. We also maintain stock for other trade brands like KraftMaid, Cambria and Silestone when a Wellborn kitchen remodel spills over into outdoor surfaces.
Give us a call at (213) 277-6578. We’ll look at what you have, tell you what it costs to fix, and put it in writing before any work starts.
Written by Trevor Nash, Owner, Penhallow Remodeling Los Angeles at Penhallow Remodeling Los Angeles, serving Los Angeles and nearby areas.
