Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Windows & Doors: The Los Angeles Owner’s Guide
KraftMaid doesn’t manufacture windows or exterior doors as standalone product lines, but the KraftMaid cabinet-adjacent doors and glass inserts inside kitchens, pantries, and built-ins across Los Angeles homes fail in predictable ways: hinges sag, glass panels fog, and door fronts separate from their frames. When you call us about a KraftMaid door or window insert, we typically diagnose it during a free estimate visit and most replacements run $350 – $1,100 installed depending on the door size, glass type, and whether we’re matching an existing cabinet line or replacing the full front. We stock common KraftMaid hinge sets, glass retainer clips, and door bumpers on the truck, which means many fixes happen the same day we arrive.
What usually brings Los Angeles homeowners to this page is a door that won’t stay closed, a glass insert that’s fogged between panes, or a hinge that’s pulled loose from the cabinet face. The part itself is rarely complicated. Matching it to the right KraftMaid series without creating a visible mismatch is where it gets tricky.
Which KraftMaid Models This Applies To
KraftMaid has run several cabinet door platform changes over the years, and the hinge cup diameter and door thickness are the two specs that matter most when matching a replacement. The older Veneer and solid-wood raised-panel lines used a 35 mm hinge cup on doors typically 3/4 inch thick. Newer KraftMaid Vantage and KraftMaid Momentum lines mostly kept the same cup size but moved to thinner profile doors on some frameless runs. If you’re holding a door from a KraftMaid pull-out pantry or an integrated glass-front upper cabinet, check the inside edge for a sticker with a series code; if that’s gone, measure the hinge cup and door thickness before buying anything.
Penhallow Remodeling Los Angeles is an independent service provider, not affiliated with KraftMaid. But we’ve installed and matched enough of their doors across kitchens in Encino, Sherman Oaks, and Los Feliz to know which aftermarket hinges fit the factory cup without drilling, and when it’s smarter to order a finished door front directly from KraftMaid to keep the wood grain and finish consistent. For glass inserts, OEM is usually the better call because aftermarket glass rarely matches the original tint or argon fill. For hinges, bumpers, and retainer clips, quality aftermarket equivalents from brands like Blum and Salice often outlast what was originally on the door.
Styles & brands we work with
Signs Your KraftMaid Windows & Doors Is Failing
- The door sags and scrapes the frame when you close it. This is almost always the hinge spreading or the screws stripping out of the cabinet face. In Los Angeles, the dry air and seasonal temperature swings make wood fibers shrink and expand, which weakens the screw bite over time.
- Glass panels fog between the panes and won’t wipe clean. The insulated glass unit has lost its seal. Once moisture gets between panes, no cleaning fixes it; the unit needs replacement. This is especially common on west-facing kitchen windows and glass-front cabinets that take direct afternoon sun.
- The door won’t align or won’t stay latched. Cabinet settling or a worn bumper changes the door’s travel path. Sometimes the latch plate needs repositioning; other times the hinge is too far gone to adjust.
- The finish is peeling or discolored along the bottom edge. Humidity from dishwashers, sinks, and steam kettles attacks the door’s bottom rail first. Once the factory finish fails there, the exposed MDF or wood core starts swelling.
- You hear a creak or crack when opening the door past 90 degrees. This is often the hinge binding because the cup has loosened inside the door itself. Continuing to force the door open tears out the cup and then you’re replacing the whole door front.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a standard KraftMaid door replacement in Los Angeles, expect $350 – $800 per door for a matched OEM-style front with new hinges and hardware installed. Glass insert replacements run $200 – $450 per panel on top of the door cost depending on size and argon fill. Full glass-front KraftMaid cabinet door assemblies with the aluminum frame work usually land between $500 – $1,100 per door. What pushes the number higher: unusual dimensions, leaded or beveled glass, matching a discontinued finish, or reworking a damaged cabinet face that the hinge tore out with it.
Every quote from Penhallow Remodeling Los Angeles includes the part, the labor, and the written price before any work starts. The number we give you on estimate day is the number on the invoice. We back the installation like we back every repair: a written guarantee, and if something fails inside our 365-day Done Right Promise window, we come back and fix it at no charge.
DIY or Call Us?
You can safely tighten a loose hinge screw, adjust a cabinet door’s alignment, or replace a clip-on bumper yourself. Those are five-minute fixes with a screwdriver and a little patience. What you shouldn’t do is attempt a glass insert replacement on a KraftMaid door with a compression-fit retainer; the glass is tempered but the frames are thin aluminum, and one slip with a flathead screwdriver cracks the glass or kinks the frame beyond re-use. Door fronts with integrated hinges are also easy to ruin if you misjudge the hinge cup depth.
Our thing is the same as in every room we work: give you a number first, then pick up the tools. If the door is repairable, we’ll tell you that and charge you for the repair, not the unnecessary replacement. Call (213) 277-6578 and we’ll come look at the exact door in your kitchen, tell you what it needs, and write you a number before anything comes off its hinges.
FAQs
Most KraftMaid cabinet doors last 15 – 25 years in Los Angeles conditions; the hinges and bumpers typically wear out first, while glass inset panes can fog as early as 8 – 12 years if they have direct sun exposure. A door that gets opened twenty times a day will wear faster than one above the fridge. Call (213) 277-6578 if you want us to look at whether yours needs a part or a full replacement.
A fogged glass insert cannot be repaired; once the seal between panes fails and moisture gets inside, the entire insulated glass unit needs replacing. We do that in Los Angeles regularly, and the new unit reuses your existing door frame. Call (213) 277-6578 for a free estimate on your exact panel size.
Most single-door replacements take 45 – 90 minutes once we’re on site, and we stock common hinge sets, bumpers, and retainer clips on the truck. Custom-ordered door fronts or OEM glass inserts usually take 1 – 3 weeks to arrive. We’ll tell you the timeline before you commit to anything.
We stock standard KraftMaid-compatible hinge sets, glass retainer clips, and door bumpers on our trucks, so many repairs happen the same day without a special order. Finished wood door fronts and tinted or argon-filled glass inserts usually come from KraftMaid or a matched local fabricator. Call (213) 277-6578 and we’ll check your model specifics over the phone or during a free site visit.
Written by Trevor Nash, Owner, Penhallow Remodeling Los Angeles at Penhallow Remodeling Los Angeles, serving Los Angeles and nearby areas.
