Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Aluminum Fence Installation Cost in Los Angeles?
Aluminum fence installation in Los Angeles typically costs between $4,720 and $11,800 for a standard residential project. Most homeowners in LA pay around $7,500 for roughly 150 linear feet of mid-grade aluminum fencing with two gates. The final number depends on the fence height, the number of gates, the condition of the soil on your lot, and whether your property sits on a slope or flat ground.
Aluminum is not the cheapest fencing material in Los Angeles, but it’s one of the most predictable on price. Unlike wrought iron, it won’t rust in the coastal air. Unlike vinyl, it won’t warp in the Valley heat. And unlike wood, it won’t split, rot, or need restaining every three years. You pay more up front than you would for steel or chain link, and you get a fence that tends to stay straight and keep its finish for 15 to 25 years with almost no upkeep.
Penhallow Remodeling Los Angeles installs aluminum fencing for homeowners across the city, from the flat, sandy soil of the Ballona corridor to the decomposed granite on the north slopes of the Hollywood Hills. The pricing guide below reflects the Los Angeles market as of 2026, with line-item ranges that match what our crews actually see on estimates. If you’d like a written price for your specific property, call (213) 277-6578 and we’ll set up a free site measurement.
Key Takeaways
- The overall range for aluminum fence installation in Los Angeles is $4,720 to $11,800.
- Most residential aluminum fence projects in LA run $32 to $55 per linear foot, including posts, panels, gates, and labor.
- The biggest cost drivers are fence height, total linear feet, number of gates, soil conditions, and whether the ground has slope or grade changes.
- Aluminum fencing is rust-resistant and holds up well in Los Angeles coastal and inland climates.
- Installing a fence yourself is possible on flat lots but risky on hillsides, and poor post setting is the number one reason aluminum fences lean within two years.
Penhallow Remodeling writes a price before any work starts, every time, and backs the installation with our own 365-Day Done Right Promise in writing. If a post shifts or a gate sags inside that year, we come back and set it right at no charge. That’s the way our crews work across every home project we take on in the city.
Aluminum Fence Installation Cost Breakdown (2026)
The table below shows what the separate pieces of an aluminum fence installation typically cost across Los Angeles. These numbers come from recent estimates in neighborhoods like Westchester, Atwater Village, Granada Hills, and Eagle Rock. They assume a licensed contractor, not a handyman off an app, and they include haul-away of any old fencing that needs to come out first.
| Line Item | Typical Los Angeles Range |
|---|---|
| Aluminum fence panels (4 – 6 ft high, residential grade) | $18 – $38 per linear foot |
| Aluminum posts and post caps | $8 – $16 per linear foot |
| Old fence removal and haul-off | $3 – $8 per linear foot |
| Single walk gate (standard 4 ft wide) | $350 – $750 each |
| Double drive gate (10 – 12 ft wide) | $900 – $2,200 each |
| Post hole digging and concrete setting | $6 – $14 per linear foot |
| Labor for installation | $12 – $22 per linear foot |
| Permits (varies by LA jurisdiction) | $100 – $500 (where required) |
Here’s what that looks like on three real project sizes in Los Angeles.
A small front-yard fence along the sidewalk, roughly 60 linear feet with one walk gate, lands between $2,850 and $4,900. That range assumes standard 4-foot panels in a decent grade of aluminum. If you choose a 6-foot panel for more privacy screening along a street-facing yard, the materials go up proportionally.
A typical back-and-side yard enclosure of 150 linear feet with one walk gate and one drive gate runs $5,500 to $10,400. This is the most common aluminum fence project our Los Angeles clients ask us to quote, and it’s the sweet spot where height, gate count, and panel grade matter most.
A larger corner-lot enclosure of 250 linear feet with two walk gates and a double drive gate runs $9,800 to $17,500. Corner lots are common in neighborhoods like Jefferson Park and Leimert Park, and they add line feet quickly. A corner-lot fence also often requires two street-facing sides with matching panel alignment, which adds a little more cutting and post-setting time.
If your existing fence is chain link, the removal haul-off is lighter than a rotted wood fence or an old wrought iron fence, and that’s worth mentioning when you call for a quote. Any of these jobs comes with a written price before work starts, not an estimate that shifts after the first post hole goes in.
What Affects Aluminum Fence Installation Pricing in Los Angeles
Los Angeles is not one flat neighborhood. The San Fernando Valley soil behaves differently than the canyon hillsides, and a fence quote in Thousand Oaks will land differently than one in Los Feliz. Here are the six things that move an aluminum fence price most in this market.
- Soil and rock conditions. In the Valley, crews often hit hardpan clay a few inches down, which digs slowly and demands a little more concrete per post. In the hills, post holes run into decomposed granite and occasional boulders, which slow the dig and occasionally require a rock bar out of the truck. Flat lots in beach-adjacent neighborhoods with sandy soil are the quickest and cheapest to dig.
- Slope and grade changes. A fence that follows a slope means racked panels or stepped panels, and both take more cutting, more measuring, and more patience. Many Los Angeles hillside lots need stepped installation, which adds roughly 10 to 20 percent to the labor portion of the bill.
- Fence height. A 4-foot front-yard fence uses shorter posts and lighter panels. A 6-foot backyard privacy fence uses longer posts, more concrete, and heavier panels. The height difference is the single largest material cost lever on any Los Angeles aluminum fence quote.
- Gate count and gate hardware. Gates are the most labor-intensive part of an aluminum fence. A sagging gate six months later is usually a hinge problem or a post that was set shallow. Our crews set gate posts deeper, use heavier concrete brackets, and spec self-closing hinges where the client wants them, all of which adds cost but keeps the gate square.
- Existing fence removal. If there’s an old fence in the way, someone has to pull it, cut it, and haul it. Some Los Angeles dump rates and transfer station fees run higher than homeowners expect, and that cost shows up honestly in the written price we give.
- Permits and local requirements. Different jurisdictions across Los Angeles County apply different permit rules to fencing. Some cities require a permit only above 7 feet. Some HOAs require a specific panel profile or color. A fence that needs an architectural-committee approval in one month can push a project back and add a small paperwork cost. We check the local requirement for your specific address before we quote, and we list any permit fee plainly on the written estimate.
Aluminum vs. Other Fence Materials in Los Angeles
If you’re reading this guide, you’re probably also weighing aluminum against vinyl, steel, and wood. Here’s the honest comparison for the Los Angeles climate.
Aluminum versus vinyl. Vinyl fence installation in Los Angeles runs $4,130 to $10,620, slightly less than aluminum’s $4,720 to $11,800 range. Vinyl starts cheaper and looks crisp for the first couple of years, but the Los Angeles sun is unforgiving on vinyl, especially in the Valley where July temperatures routinely hit 100 degrees. Vinyl panels warp, yellow, and crack. Aluminum keeps its shape and its powder-coated finish much longer, and it doesn’t fade the way the lower-end vinyl does. If you plan to stay in the house more than five years, aluminum is the better Los Angeles-specific call.
Aluminum versus steel. Steel is the budget metal fence. It’s strong, but it rusts. Angeles coastal neighborhoods like Palms, Mar Vista, and anything within a mile or two of the ocean carry real salt in the air, and uncoated steel posts rust at the base within a few seasons. Aluminum is naturally resistant to that. Painted or powder-coated steel holds up better, but at that point the price difference narrows and aluminum is the cleaner long-term material.
Aluminum versus wrought iron. Wrought iron has real curb appeal, but it is heavy and rust-prone without regular maintenance. Every couple of years, a Los Angeles iron fence needs scraping, spot-priming, and repainting. Aluminum panels are cast to mimic that classic spear-top profile without any of the rust burden. For a homeowner who wants the iron look but not the iron maintenance, aluminum is the sensible middle ground.
One caution that applies across all fence types: a fence built on a slope needs to be built with the slope, not plumbed on flat assumptions. We see this mistake often in Los Angeles, where a crew sets posts at a uniform depth on what looks like flat ground, but the grade carries a subtle six-inch fall over 50 feet. The fence comes out slightly askew, rainwater pools at the low end, and the posts start to lean. This is exactly why we write our 365-Day Done Right Promise into every fence installation agreement: if the alignment is off and it’s our work, we come back and correct it at no charge.
How to Save on Aluminum Fence Installation
There are real ways to bring the price down without buying a flimsier fence that you’ll regret in three years. Here’s what we recommend to Los Angeles homeowners who want a good aluminum fence at the lowest responsible cost.
Fence the functional parts first. Not every lot needs full perimeter fencing from day one. Some homeowners start with the back yard, where kids and dogs need the enclosure, then add the front yard the following year. Aluminum is easy to phase because the panel style and color stay available, and the new sections tie into the existing posts cleanly. If you phase, tell your installer up front so they set the end posts in a way that accepts future panel attachment.
Standardize your panel height and style. Ornamental spear tops, arched panels, and extra-tall posts all push the material cost up. A straight, square, 4-foot or 6-foot panel in black or bronze powder coat is the most common configuration in Los Angeles, and common means less expensive. Custom colors and custom panel widths almost always require special ordering.
Keep gates where they actually help. Every gate adds a few hundred dollars minimum, and a double drive gate with a drop rod and proper hardware can add over a thousand. If you have a side yard that rarely gets used, consider a regular fixed panel instead of another gate. You’ll save the gate cost and the extra post work.
Remove the old fence yourself if it’s small. If the old fence is a short run of wood or chain link and you’re comfortable with a sawzall and a post puller, removing it yourself saves the haul-off line item. We do ask that old material is cut into manageable lengths and stacked near the curb before our crew arrives. If that sounds like more of a headache than the savings is worth, leave it in the quote and we’ll handle it.
Get a written price, not a verbal range. The best way to save money in Los Angeles is to avoid the second-visit price creep that happens when a contractor gives a loose number over the phone and then “discovers” complications on install day. Penhallow Remodeling puts the written price on paper before the first post goes in. If the discovery happens, it happens during the measurement visit, not after demo day. That’s the Kingswell standard: written price up front, a real arrival window, and a written guarantee behind the work.
If you want to know what your specific project would cost, call us at (213) 277-6578 for a free estimate. Trevor Nash and the Penhallow crew will schedule a measurement, walk the fence line with you, and leave you a written number you can hold us to.
FAQs – Aluminum Fence Installation Cost
How much does aluminum fence installation cost per linear foot in Los Angeles?
In Los Angeles, aluminum fence installation typically runs $32 to $55 per linear foot installed, including panels, posts, concrete, gates, and labor. A 100-linear-foot project in a neighborhood like North Hollywood, for example, typically lands around $3,800 to $5,500 depending on height and gate count. For an exact number on your own fence line, call (213) 277-6578 for a free measured estimate.
Is aluminum fencing cheaper than wood in Los Angeles?
No, wood is cheaper to install, but it costs more over time. A cedar or redwood fence in Los Angeles might run $18 to $32 per linear foot installed, significantly less than aluminum’s $32 to $55 per linear foot. But wood fences need staining or sealing every two to three years, and termite damage in Southern California makes wood a recurring expense. Aluminum costs more up front and then costs almost nothing to maintain, which is why many homeowners in Los Angeles end up choosing it for the long game.
How long does aluminum fence installation take in Los Angeles?
A typical 150-linear-foot aluminum fence installation takes 2 to 4 working days in Los Angeles, depending on slope, soil conditions, and gate count. Flat-yard projects with standard panels often wrap up in two days. Hillside projects with stepped panels and deep post settings take longer. We’ll give you a specific arrival window and a completion timeline in the written estimate before work starts. If you need the fence up fast, call (213) 277-6578 and we’ll talk about the schedule.
Does aluminum fencing meet Los Angeles pool safety codes?
Yes, aluminum fencing is commonly used for Los Angeles pool enclosures and meets the required height and latching standards when installed correctly. Pool code in most Los Angeles jurisdictions calls for a 60-inch fence with self-closing, self-latching gates, and aluminum suits that requirement well because the hardware is reliable and the finish doesn’t rust in the chlorinated air near a pool. If you’re fencing a pool, we’ll spec the right gate hardware and height for your city’s code before we quote.
Is it cheaper to repair an aluminum fence or replace it?
Repairing an aluminum fence in Los Angeles usually costs $150 to $600 per section or gate, while full replacement runs $4,720 to $11,800 for a standard yard. If the posts are still solid and the issue is a single bent panel or a misaligned gate, repair makes financial sense. If multiple posts are leaning or the finish has failed across the whole fence line, replacement is usually the better call because aluminum panels don’t straighten well once they kink. We’ll assess your existing fence honestly and tell you which route we’d recommend. Call (213) 277-6578 to schedule a look.
If you are looking for more details on materials, styles, and our installation process, see our main Aluminum Fence Installation in Los Angeles page. We walk through panel grades, colors, height choices, and what to expect on the day the crew arrives.
Written by Trevor Nash, Owner at Penhallow Remodeling Los Angeles, serving the Los Angeles market with written pricing and the Kingswell guarantee since 2004.
Pricing reflects the Los Angeles market as of 2026. Penhallow Remodeling Los Angeles offers free estimates – call (213) 277-6578.
What Our Customers Say
"Primary bath remodel. They gave me a schedule and hit it, called me for every decision, and kept the dust contained with plastic. Beautiful tile work."
- Dana Monroe"Did our whole kitchen. The written estimate held, which after reading remodel nightmares online I did not take for granted. Showed up every morning on time and the crew was clean and polite."
- Warren Updike"Redid two bathrooms at once. The crew protected the floors and cleaned up every single day before leaving. Quote was detailed and there were no mystery charges at the end."
- Tricia Dawson
